Resources / Compatible Kits & Components
The Neodent Grand Morse system uses a standardized 16° conical connection. Here's everything compatible with your GM implants — and what to avoid.
Every Neodent GM placement requires the correct drill sequence for the Grand Morse connection. The kits below are designed specifically for GM implants and include all instruments needed from initial osteotomy to final placement.
| Kit | Implant Coverage | Included Instruments | Ideal For |
|---|---|---|---|
| GM Complete Surgical KitFull system kit | All burs (pilot, lance, twist, final), depth stops for 8–16mm lengths, torque driver, implant mount, irrigation cannula | Full-arch cases, multi-unit All-on-4 protocols, practices placing diverse implant sizes | |
| GM Mini Starter KitBeginner / trial kit | Pilot bur, 2 lance drills, 2 final drills, 3 depth stops (10/12/15mm), torque driver, 2 implant mounts | Practices new to Neodent GM, single-tooth cases, transitioning surgeons testing the system | |
| Parallel Pins & Depth GaugesAccessory set | Parallel pins (Ø2.0mm / Ø2.5mm), depth gauges (8 / 10 / 12 / 15mm), direction indicator | Angulation verification during surgery, confirming osteotomy depth with radiographic confirmation | |
| Bone Condenser / Osteotome SetRidge expansion | 5 condensers (Ø2.0–Ø4.5mm stepped), mallet, spreader tip, autoclavable cassette | Soft bone (D3/D4) underpreparation technique, narrow ridge expansion, sinus condensation |
All components below use the Grand Morse 16° conical connection and are compatible with every Neodent GM implant (Helix GM, Drive GM, Helix Short, Zygoma GM). Available for immediate dispatch.
The following components look visually similar to GM components but use a different cone angle or connection geometry. Using incompatible components leads to micro-gaps, cement leakage, abutment fracture, and screw loosening. Do not substitute.
| Component / System | Reason Not Compatible | Status |
|---|---|---|
| Straumann CrossFit® (BLT internal) | Different cone angle (CrossFit is not a 16° Morse taper); different micro-thread engagement | NOT COMPATIBLE |
| Nobel Biocare TiUnite internal | Nobel's internal tri-channel hex is a fundamentally different geometry; no angular engagement equivalent | NOT COMPATIBLE |
| Osstem GS (internal hex) | Internal hex connection vs Grand Morse cone; different platform diameter and internal geometry | NOT COMPATIBLE |
| MegaGen AnyRidge components | AnyRidge uses a proprietary wide-platform connection; not equivalent to GM 16° cone | NOT COMPATIBLE |
| Dentsply Astra EV components | AstraTech Conical Connection uses 11° taper angle; different from Grand Morse 16° | NOT COMPATIBLE |